Technical Details
| General |
| Product code |
49084 |
| Guarantee |
1 year |
| WRAS approval |
1506334 |
| Features |
| Pump type |
Centrifugal |
| Mechanical seal |
Nitrile / Carbon / Silicon Carbide |
| Anti vibration feet |
|
| Inlet strainer(s) |
|
| Flexible hoses |
4 |
| Dry run protection |
|
| Performance |
| Maximum head (closed valve) |
1.5 bar |
| Performance @ 9 l/min |
1.1 bar |
| Performance @ 18 l/min |
0.7 bar |
| Maximum flow |
32 l/min |
| Maximum static inlet pressure |
10 metres |
| Maximum working pressure* |
300 kPa (3 bar) |
| Maximum ambient air temperature |
40 °C |
| Min / Max water temperature** |
Min 4 °C / Max 65 °C |
| Flow switch sensitivity (approx) |
0.8 l/min |
| Connections |
| Pump connections |
G ¾ male |
| Flexible hoses |
| Connections |
G ¾ female x 15 mm push-in
200 mm long |
| Motor |
| Type |
Series wound, auto-reset thermal trip |
| Duty rating |
Intermittent, (S3) 30 mins on/30 mins off @ 9 l/min*** |
| Electrical |
| Power supply/phase/frequency |
230 V a.c./ 1 / 50 Hz |
| Current (full load) |
1.2 Amps |
| Power consumption |
200 Watts |
| Fuse rating |
3 Amps |
| Power cable (pre-wired) |
1.5 metres |
| Physical |
| Enclosure protection |
IPX2 |
| Length |
250 mm |
| Width |
97 mm |
| Height (excluding hoses) |
152 mm |
| Weight (including fittings) |
2.6 Kg |
* The maximum pressure that can be applied to the pump under any installation conditions.
** A stored water temperature of 60 °C is considered sufficient to meet all normal requirements and will minimise deposition of scale in hard water areas.
*** Both heads pumping 4.5 l/min.
